T1 B-Series Cam Trigger Kit

The use of this kit allows you to change from the factory Honda mag sensors in the distributor to a more precise digital signal from this sensor. Many aftermarket ECUs read the Hall signal much better than they do the OEM signal from the distributor. Most experience a smoother idle & much smoother power at higher RPM.

This also allows complete removal of the factory distributor when a multi channel CDI box & individual coils are used with it. If you want to keep a single channel ignition box & the distributor, then this setup can still be used. These signals are on the input side of the ecu, while the ignition system is on the output. Any combination of ignition box/coils will work.

The basic kit consists of:

• 1 Golden Eagle exhaust cam gear with rare earth magnets installed
• 1 Dual Pole Hall sensor & mating connector
• 1 Billet sensor bracket
• Installation instructions

The complete kit consists of:

• 1 Golden Eagle exhaust cam gear with rare earth magnets installed
• 1 Golden Eagle intake cam gear
• 1 Dual Pole Hall sensor & mating connector
• 1 Billet sensor bracket
• Installation instructions

Components are available separately via our drop-down menu above.